Saltear al contenido principal
  • Schreck  S.,  Masson  C.,  Johansen J.,  Sorensen N.N., Zahle F.,  Bak C.,   Madsen H.A,  Politis E., Schepers  G., Lindenburg K.,  Snel H.,  Rooij R.P.J.O.M van, Arens E.A, Bussel G.J.W. van, Kuik G.A.M. van ,  Meng F.,  Sant T.,   Knauer A.,  Moe G.,  Munduate X., González A.,  Ferrer E., S. Gomez  S.,  Barakos G.,  Ivanell S. Final Report, IEA Wind Annex XX: HAWT Aerodynamics and Models from Wind Tunnel Measurements  NREL/TP-500-43508 (USA) , December 2008.
  • Gómez-Iradi S., Barakos G.N.and Munduate X. CFD Analysis of HAWT. “Validation of the WMB Method”. Presentation at the bienal 9th German Wind Energy Conference at Bremen (Germany). 26-27/10 2008 DEWEK 2008.
  • Gomez-Iradi S. and  Barakos, G.N.“Computational Fluid Dynamics Investigation of Some Wind Turbine Rotor Design Parameters”.  Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 222(5):455-470, 2008.
  • Gastón, M., Pagola, I., Martí, I., Ramirez, L. “New developments on solar radiation forecasting at CENER”. IEA-SHC Task 36 “Solar Resource Knowledge Management” 5th Experts Meeting Wels, Austria, 2008.
  • Pagola, I.; Ramirez, L. “Observed differences in the application of BSRN quality control procedures”. IEA-SHC Task 36 “Solar Resource Knowledge Management” 5th Experts Meeting Wels, Austria , 2008.
  • Pagola, I., Gastón, M., Ramirez, L. “Comparison of several global-to-beam irradiance models in Spain”. IEA-SHC Task 36 “Solar Resource Knowledge Management” 5th Experts MeetingWels, Austria 2008.
  • Ezquer, M., Zugasti, E., Cuadra, J.M., Murillo, M., Turumbay, A., Gavilanes, I., Lagunas, A.R. “Buckling test: a useful tool for a mechanical characterization of silicon wafers”.23rd European Photovoltaic Solar Energy Conference, 2008.
  • Ezquer, M., Petrina, I., Cuadra, J.M., Lagunas, A.R. “Design of a special set-up for the I-V characterizagion of bifacial photovoltaic solar cells”. 23rd European Photovoltaic Solar Energy Conference, 2008.
  • Zugasti, E., Gavilanes, I., Ezquer, M., Turumbay, A., Rojo, G., Murillo, M., Cuadra, J. Manuel, Lagunas, A.R. “Transfer and Pick and Place Devices Silmulation for Thin Wafers”. 23rd European Photovoltaic Solar Energy Conference, 2008.
  • Ezquer, M., Zugasti, E., Cuadra, J.M., Murillo, M., Turumbay, A., I. Gavilanes, I., Lagunas, A.R. “Buckling test: a useful tool for a mechanical characterization of silicon wafers”. 23rd European Photovoltaic Solar Energy Conference, Valencia, 2008.
  • Petrina, I., Cueli, A.B., Díaz, J., Moracho, J., Lagunas, A.R.”Adapting facilies for IEC62108 Testing” 23rd European Photovoltaic Solar Energy Conference, Valencia, 2008.
  • Ezquer, M., Zugasti, E., Cuadra, J.M., Murillo, M., Turumbay, A., Gavilanes, I., Lagunas, A.R.. “Buckling test: a useful tool for a mechanical characterization of silicon wafers”.23rd European Photovoltaic Solar Energy Conference, 2008.
  • Ezquer, M., Petrina, I., Cuadra, J.M., Lagunas, A.R.” Design of a special set-up for the I-V characterizagion of bifacial photovoltaic solar cells”. 23rd European Photovoltaic Solar Energy Conference, 2008.
  • Ezquer, M., Petrina, I., Cuadra, J.M., Lagunas, A.R.” Design of a special set-up for the I-V characterizagion of bifacial photovoltaic solar cells”. 23rd European Photovoltaic Solar Energy Conference, 2008.
  • Zugasti, E., Gavilanes, I., Ezquer, M., Turumbay, A., Rojo, G., Murillo, M., Cuadra, J. Manuel, Lagunas, A.R. “Transfer and Pick and Place Devices Silmulation for Thin Wafers”. 23rd European Photovoltaic Solar Energy Conference, 2008.
  • Sanz J., Cabezón D., Martí I., Patilla P., van Beeck J., “Numerical CFD modelling of non-neutral atmospheric boundary layers for offshore wind resource assessment based on Monin-Obukhov theory”, EWEC 2008 scientific proceedings, Brussels, Belgium, April 2008.
  • Barthelmie, R.J., Frandsen, S.T., Rathmann, O., Politis, E., Prospathpoulos, J., Rados, K., Hansen K., Cabezon D., Schlez W., Phillips, J., Neubert, A., van der Pijl, S. and Schepers, G. “Flow and wakes in large wind farms in complex terrain and offshore”. European Wind Energy Conference, Brussels, March 2008.
  • Cabezón D., Sanz J., Martí I., Crespo A., “Validation of a CFD wake model based on the actuator disk technique and the thrust coefficient”. Preliminary results. Proceedings of the European Academy of Wind Energy (EAWE), Magdeburg (Germany), 1-2 Oct 2008.
  • Barthelmie, R.J., Frandsen, S.T., Rathmann, O., Politis, E., Propspathpoulos, J., Rados, K., Hansen, K., Cabezon, D., Schlez, W., Phillips, J., Neubert, A., van der Pijl, S. and Schepers, G. “2008: Flow and wakes in large wind farms in complex terrain and offshore”. American Wind Energy Association Conference, Houston, Texas, June 2008.
  • Barthelmie, R.J. Politis, E., Prospathopoulos, J., Frandsen, S.T., Rathmann, O., Hansen, K., van der Pijl, S., Schepers, G., Rados, K., Cabezón, D., Schlez, W., Phillips, J., Neubert, A. 2008: “Power losses due to wakes in large wind farms”. World Renewable Energy Congress X, Glasgow, July 2008.
  • Gonzalez, A., Munduate, X. “Three-dimensional and rotational aerodynamis on the NREL phase VI wind turbine blade”. 26th AIAA/ASME Wind Energy Symposium, Reno, NV, January 8-11, 2007. Journal of Solar Energy Engineering. V. 130, N. 3. 2008 Transactions of the ASME / 031008-1-7.
  • Celaya, J., Gil, J. “Evaluation of torrefaction and pelletization process to transform biomass in a biofuel suitable for co-combustion”. Proceedings at the 16th European biomass Conference & Exhibition. Valencia, 2008.
  • Sánchez, D., Goñi I. and Gil, J.”New pilot plant for biomass treatment”. Proceedings at the 16th European biomass Conference & Exhibition. Valencia, 2008.
  • Funcia. I. and Gil, J “Tar quantification method and its influence on the dew point calculation””. Proceedings at the 16th European biomass Conference & Exhibition. Valencia, 2008.
  • Del Campo Colmenar , I, Echeverría Goñi, I., Barado Pardo, I., Berlanga Labari, C., Fernández Carrasquilla, J. Estudio de Compatibilidad de Materiales Plásticos con mezclas de Bioetanol y Gasolina. XVII Congreso Nacional de ingeniería de Materiales, 2008.
  • Del Campo, I., Echeverría, I., Barado Pardo, I., Berlanga Labari, C., Fernandez Carrasquilla, J.”Estudio de compatibilidad de materiales plásticos con mezclas de bioetanol con gasolina”. XVII Congreso Nacional de Ingeniería de Materiales. Gijón, 2008.
Volver arriba